Drifter Overland

Active Cargo System

 

Active Cargo System

 

Accessories & Active Cargo System Installation

Accessories & Active Cargo System Installation

from 10.99

AWNING MOUNTING KIT

The Active Cargo System is a fully-upgradable, customizable truck bed rack. The ACS awning mounting brackets is designed to securely attach most awnings that attach with 6mm bolts to the ACS rack. Simple installation using the ACS quad rail. Fits any size ACS truck rack.

Specifications: Active Cargo System Truck Bed Rack Awning Mounting Kit

  • Simple T-slot installation
  • Grade 8.8 zinc-plated fasteners
  • Dose not interfere with sliding center load bar
  • Designed, engineered and manufactured in the USA

Tested to fit on these awnings.

  • CVT Standard awning 55” 79” and 99” widths 
  • CVT summit awning 48" 55" 79" and 99" Widths 
  • ARB 1250, 2000 and 2500 awning
  • Smittybilt awning 8.2FT X 6.2FT

Bolt Kit

Do you have an accessory made by another manufacturer? A bicycle, kayak or locking surf rack? Want to fit it to our Active Cargo System truck bed rack? All you need in most situations is our bolt kit. The bolt kit comes with 4 bolts and nuts allowing you to attach almost anything! 

Specifications – Active Cargo System Truck Bed Rack Bolt Kit

  • Grade 8.8 zinc-plated fasteners

  • Requires the hole size in the accessory to be at least 5/16" (8mm) in diameter. 
  • Weight: 1 lb.

Extra load bar

However, if you have large or heavy loads (like a rooftop tent), we suggest you add a third load bar. The ACS load bar ships with all necessary mounting hardware and installs in minutes.

Specifications: Active Cargo System Truck Bed Rack Load Bar

  • Dual-stage powdercoated steel brackets
  • Anodized aluminum load bar, 48" long
  • Simple T-slot installation
  • Grade 8.8 zinc-plated fasteners
  • This item is secured with locking nuts NOT KNOBS
  • Weight 6 lbs.
  • Designed, engineered and manufactured in the USA

FLAG POLE KIT

Show your colors! The flag pole kit comes with everything to securely mount up to a 2' X 3' flag on the back of your Active Cargo System truck bed rack. Includes 1” diameter black-anodized flag pole and all mounting hardware.

Specifications: Active Cargo System Truck Bed Rack Flag Pole Kit

  • Dual-stage powdercoated steel brackets
  • 1’ diameter black-anodized aluminum flag pole
  • Rubber isolators to prevent rattles
  • Grade 8.8 zinc-plated fasteners
  • Weight: 1.5lb

Note: Flag is not included with flag pole kit.

Gear Pod

The Active Cargo System truck bed rack uses integrated gear boxes for locking, water-resistant storage which easily mounts onto your rack. They have some great advantages over other gear storage systems:

  • Easy access - While most truck toolboxes use up valuable space in your truck bed and are difficult to load and unload, the ACS integrated gear box is side-mounted. The side mounting allows quick and easy access to all your adventure gear while keeping it safe from the elements with an automotive-grade silicon seal.
  • Quick install and removal - An ACS integrated gear box can be installed on or removed from your ACS rack within seconds using 4 T-bolts and nuts.

Specifications - Active Cargo System Integrated Gear Box

  • Manufactured from roto-molded high-density polyethylene (same as kayaks)
  • Simple T-slot installation
  • Key locking (comes with 2 keys)
  • Dual-stage powdercoated steel brackets
  • Automotive grade silicon seal
  • Grade 8.8 zinc-plated fasteners
  • Weight 18 lbs.
  • Weight capacity 65 lbs.
  • Storage space 10.5 gallons (1.4 cubic feet)
  • Designed, engineered and manufactured in the USA
  • U.S. Patent 9586629

HI-LIFT JACK BRACKET

If you’re an off-roader you have certainly heard of the Hi-Lift jack! This versatile tool is a must-have when venturing into the wilderness. As great as these jacks are, carrying these 30+ pounds of steel securely and safely can be a chore. The Active Cargo System Hi-Lift jack bracket attaches any size of Hi-Lift jack securely to your ACS truck bed rack. Manufactured from powdercoated steel and zinc-plated hardware, this mount will keep your jack secure and within easy reach for years to come. The bracket has two padlock holes to prevent theft and wing nuts to prevent rattling. 

Specifications: Active Cargo System Truck Bed Rack Hi-Lift Jack Bracket

  • Dual-stage powder coated steel 
  • Holds any size of Hi-Lift jack
  • Padlock holes for security
  • Simple T-slot installation
  • Grade 8.8 zinc-plated fasteners
  • Weight 3 lbs.
  • Designed, engineered and manufactured in the USA

Light Bracket

Shine some light on the situation! Active Cargo System light brackets are engineered to mount a large variety of LED, HID and halogen lights onto any ACS truck bed rack. Installs within minutes to put light where you need it most. 

Specifications: Active Cargo System Truck Bed Rack Light Bracket

  • Designed to hold any size offroad racing light LED/HID/Halogen
  • Simple T-slot installation
  • Dual-stage powdercoated steel
  • Grade 8.8 zinc-plated fasteners
  • Weight: .8lb
  • Weight capacity 25 lbs.
  • Designed, engineered and manufactured in the USA

Note: Light NOT included, just bracket.

Load Stop

Need to carry kayaks, wood or ladders on your Active Cargo System truck bed rack? The ACS load stop is simple and refined:

  • Easy install - Installs without tools in minutes, keeps cargo from shifting laterally on your ACS rack.
  • Secure mounting - Integrated tie-down strap point for tightening the load.

Specifications: Active Cargo System Truck Bed Rack Load Stop

  • Dual-stage powder coated steel
  • Designed to adjust without tools and hold cargo on the rack securely
  • Integrated tie-down strap point
  • Simple T-slot installation
  • Adjusts with a turn of the dual compound knob
  • Grade 8.8 zinc-plated fasteners
  • Weight: 5 lbs.
  • Designed, engineered and manufactured in the USA
  • Patent pending

MAXTRAX Mounting Plate

The Active Cargo System is a fully-upgradable, customizable truck bed rack. The ACS MAXTRAX mounting plate is designed to securely attach MAXTRAX sand ladders to the ACS rack. Simple installation using the ACS quad rail. Fits any size ACS truck rack. Comes shipped with MAXTRAX mounting pins!

Specifications: Active Cargo System Truck Bed Rack MAXTRAX sand ladder Mounting Plate

  • Simple T-slot installation
  • Grade 8.8 zinc-plated fasteners
  • Weight 4.0 lbs.
  • Includes MAXTRAX mounting Pins
  • Designed, engineered and manufactured in the USA
  • Because of the length of the MAXTRAX no other accessories may fit on 5'-1/2 truck beds

Note: MAXTRAX sand ladders NOT included.

Roof Top Tent Bracket

Does your off road truck include a roof top tent? These amazing creations let you sleep in comfort above the creepy crawlies and wildlife below! Mounting these 200+ pound behemoths, however, can be a chore. We have simplified this with our Active Cargo System roof top tent mounting brackets. The brackets attach to the ACS truck bed rack with included hardware. Once the bracket is mounted, the tent can be installed and removed with four screws.

Note: Some tents require three load bars to prevent the tent floor from flexing during use. Please check your roof top tent dimensions, or check with your tent manufacturer, to see if this is the case with your tent. A third load bar for your ACS rack can be purchased separately.
 

Specifications: Active Cargo System Truck Bed Rack Roof Top Tent Mounting Bracket

  • Dual-stage powdercoated steel 
  • Designed to hold most roof top tents with an aluminum mounting rail
  • Simple T-slot installation
  • Grade 8.8 zinc-plated fasteners
  • Weight 2 lbs.
  • Designed, engineered and manufactured in the USA

Tacoma Bed Stiffeners

The 2005-2017 Toyota Tacoma bed D-Pillars by the tailgate are known to be a weak link in an otherwise great truck. Hard off-roading can cause the D-pillar to crack overtime. The Leitner designs bed stiffener is designed to prevent this by tying the D-Pillar into the frame of the truck with heavy duty steel brackets.

  • Integrated Tie Down Loop – The Leitner Designs bed stiffener comes with an integrated tie down loop to secure all your cargo.
  • Simple Install – The brackets come with all mounting hardware. (Some drilling required)

Specifications - Active Cargo System Integrated Gear Box

  • Fits 2005-2017 Toyota Tacoma short and long bed
  • Manufactured from 3/16 steel
  • Integrated tie down loop.
  • Dual-stage powdercoated
  • Grade 8.8 zinc-plated fasteners
  • Only fits 2005-2017 Toyota Tacoma’s with Active Cargo System installed. Dose not fit vehicles without the ACS.
  • Designed, engineered and manufactured in the USA

Tie Down Ring

Our Active Cargo System tie-down ring allows you to attach a tie-down strap to almost any location on the ACS truck bed rack! Simple one-bolt installation. A must-have when carrying odd-sized cargo. 

Specifications: Active Cargo System Truck Bed Rack Tie-Down Ring

  • Type 1/8 thick 304 stainless steel
  • Working load limit of 150 lbs. 
  • Grade 8.8 zinc-plated fasteners
  • Includes 2 brackets 
  • Weight: 1 lb.

Universal Mounting Plate

The Active Cargo System is a fully-upgradable, customizable truck bed rack. The ACS universal mounting plate is designed to securely attach many kinds of items onto any ACS rack. Need to mount RotopaX fuel packs or water packs? No problem, it's compatible! The universal mount also comes predrilled for Quickfist clamps, which enable convenient mounting of shovels, axes, and other items. 

Specifications: Active Cargo System Truck Bed Rack Universal Mounting Plate

  • Simple T-slot installation
  • Grade 8.8 zinc-plated fasteners
  • Weight 4.5 lbs.
  • Designed, engineered and manufactured in the USA

Note: Containers NOT included

Accessories:
Quantity:
Add To Cart